Sheet Metal Enclosure Hardware is the wider term for products such as Locks, Locking Systems, Gaskets, Hinges, Latches, Handles, Clamps and Terminals. These products not only increase the safety of the contents inside but also improve other factors such as ease of installation and access for maintenance teams.

Locking Systems are used on large door spans where one handle operates multiple locking points. These systems are modular, providing flexibility for customising to different door sizes.

Locks generally provide a single locking point with a variety of keys to suit the differing inserts available. Generally operated through 90 degrees (quarter turn), but some operate through 180 degrees. There are different IP rated Locks available to suit the different service requirements.

Hinges are commonly used to connect a door to its frame or supporting object, to provide a point upon where it can rotate open and closed. Some Hinges can be “handed” (left-hand or right-hand) depending on how a door will be mounted.

Clamps are typically used to connect electrical conductors such as cables or terminals.

Gaskets can be used as edge protection, or to provide a seal between two surfaces (such as a door and a frame), with a wide range of profile types and fixing methods depending upon the application.